TV Wall Mounts: A Guide and Top Picks for Secure Installation

Mounting your TV on the wall is the ideal solution to save space, create a minimalist look in your living room, and enjoy optimal viewing comfort. But with the overwhelming number of models available, how do you choose the right TV wall mount?? Between the VESA standard, the weight capacity, and the type of wall you have, there's no room for error: the safety of your installation depends on it.

Follow our guide! We'll break down the essential technical criteria for you and present our selection of ultra-sturdy mounts, designed to give you complete peace of mind, especially if you're planning on mounting a TV on a concrete or brick wall.

How to Choose the Right TV Wall Mount??

Before you get started, there are three essential points to check. Proper preparation is the key to a successful and, most importantly, a perfectly secure installation.

1. Check Compatibility: Weight and VESA Standard

Your first step: check two critical pieces of information about your television—its weight and its VESA standard.

• Weight?: It may seem obvious, but the mount must be able to handle a load significantly greater than the weight of your television. Check your TV's spec sheet and choose a mount that offers a generous safety margin. Don't push the limits!
• The VESA Standard?: This is the industry standard that ensures the mounting holes on the back of your TV match those on the mount. It defines their spacing in millimetres (for example, VESA 400x400 or VESA 600x600). It's simple: just verify that your TV's VESA standard is listed in the mount's compatibility specifications.

2. Fixed or Full-Motion: A Matter of Use

Fixed or full-motion? It all depends on your room's layout and your viewing habits.

• A fixed TV wall mount is the most discreet and often the sturdiest solution. It places the TV nearly flush against the wall for a very clean, "picture frame" effect. It's the ideal choice if your sofa is directly in front of the screen and you never need to change the viewing angle.
• A full-motion tilting and swivelling TV wall mount offers you complete freedom. It allows you to pivot the screen to eliminate glare, angle it towards the dining table, or simply get easy access to the ports on the back. It's a must-have for open-plan living spaces or complex room layouts.

3. Safety First: The Wall Type

This is the non-negotiable point. The strength of your wall determines the entire safety of the installation. You can have the most robust TV mount in the world, but it's useless if it isn't securely anchored. For heavy loads—and this is especially true for a large-screen TV wall mount—there is only one option: mounting it into a load-bearing wall made of solid material (concrete, solid brick, solid block). Forget about plasterboard partitions (like drywall), hollow brick, or plaster: it's simply too dangerous.

Our Recommended TV Wall Mounts

Let's move on to our top picks. We have selected several models that stand out for their robustness and strict adherence to safety standards.

Full-Motion TV Wall Mount for 55-100 Inch Screens

Why it stands out?: This articulating model is a true heavyweight that doesn't sacrifice flexibility. It combines an impressive load capacity with a wide range of motion, thanks to its extendable arms and heavy-gauge steel construction.

Key features?:

• Load Capacity?: Supports up to 75 kg.
• VESA Compatibility?: 200x200, 300x300, 400x400 mm.
• Flexibility?: Articulating arms extend up to 67 cm, with a +5° to -15° tilt and ±3° level adjustment.
• Robustness?:5.5 mm thick steel frame and a reinforced wall plate.

Who is it for? For those with a (very) large screen (55 to 100 inches) who want maximum flexibility to position it in a large living room, without making any compromises on sturdiness. Ideal for mounting on a load-bearing concrete wall.

Fixed TV Wall Mount for 43-85 Inch Screens

Why it stands out?: Simplicity in the service of safety. This fixed TV wall mount is an ultra-reliable and discreet solution for 43 to 85-inch TVs. Its single-piece design is a guarantee of sturdiness and peace of mind.

Key features?:

• Load Capacity?: Supports up to 65 kg.
• VESA Compatibility?: 200x200, 300x300, 400x400 mm.
• Design?: Single-piece structure made of 2.9 mm thick cold-rolled steel for rock-solid rigidity.
• Security?: Anti-lift locking system to ensure the screen stays put.

Who is it for? For those who want a fixed, low-profile installation for their 43 to 85-inch TV. It's the sensible and robust choice for mounting on a concrete or solid brick wall.

Fixed TV Wall Mount for Extra-Large 60-110 Inch Screens

Why it stands out?: Built for giants. This fixed mount is specifically designed for the largest and heaviest televisions on the market. It's all about raw strength, with an extra-wide wall plate and an exceptional load capacity.

Key features?:

• Load Capacity?: Supports up to 85 kg.
• VESA Compatibility?: 200x200, 400x400, 600x600 mm.
• Maximum Stability?: Extra-wide 660 mm wall plate for optimal load distribution.
• Construction?: 2.8 mm steel frame and a safety locking system.

Who is it for? For owners of extra-large screens (60 to 110 inches) for whom safety is the number one criterion. This is THE go-to solution for mounting a TV on a concrete wall, designed to support equipment that is as heavy as it is valuable.

An Alternative to Wall Mounting?

Is drilling into your walls not an option? Or perhaps you'd prefer a piece of furniture that combines support and storage? A good TV stand remains an excellent alternative. There are even clever solutions for more complex layouts, such as fitting a corner.

? Discover our selection of painted corner TV stands to optimise your space without wall mounting.

Frequently Asked Questions about TV Wall Mounts

How do I know if my wall can support a TV mount? The simplest method is the "small hole" test: drill discreetly in a corner. Fine, grey dust? That's concrete. Red or brown? That's brick. If the drill bit suddenly sinks in after a few millimetres and the dust is white and powdery, it's a drywall partition. Remember: for heavy TV mounts, only solid materials (concrete, brick) are reliable. If you have any doubt, don't take any risks: call a professional.

What is the VESA standard and how do I find it? The VESA standard is simply the distance in millimetres between the four mounting holes on the back of your television (width x height). This information can be found in the TV's manual, on its online spec sheet, or you can measure it yourself. For example, a spacing of 40 cm in width and 40 cm in height corresponds to the VESA 400x400 standard.

Can I install a TV wall mount myself? If you are a competent DIYer and are well-equipped (hammer drill, spirit level, etc.), the installation is within your reach. Be aware, it's a two-person job, especially for large screens! Read the instructions from start to finish, respect the specified drill diameters, and only use the provided wall plugs and screws, which are designed for solid walls. If you have the slightest doubt, don't try to be a hero: entrust the installation to a professional.