If two front-loading appliances can be installed on a stable floor using a kit compatible with their exact model numbers, stacking them frees up floor space while keeping washing and drying separate. If the height or layout makes this impractical, a washer-dryer avoids stacking, but its drying capacity may be lower than its washing capacity.
You want to keep washing and drying separate without giving up floor space for two appliances. Que Choisir Ensemble says the appliances must be front-loading and similar in size; you should still check the kit and make sure the installation will be stable.
You can only fit one appliance and are considering a washer-dryer. LG France presents this type of machine as a way to combine washing and drying; compare both capacities before choosing.
You want to add a tumble dryer above your existing machine. Note down the full model numbers of both appliances and check that they are approved for use with your chosen kit, rather than relying on their dimensions alone.
Consider this : if you have enough height, a stable floor and a kit approved for the exact model numbers of both appliances.
Bear in mind : the tumble dryer’s controls and maintenance points may be harder to reach when it is stacked. Samsung France pairs the SKK-ZSD kit with model numbers WF90F09C4SU3 and DV90F09F4SU3; check the manuals and load limits too.
Consider this : if the kit manufacturer confirms it is compatible with the two models in question.
Bear in mind : a depth range alone doesn’t confirm that two appliances can be stacked together. Electrolux states that its E1WYHSK2 kit is suitable for front-loading Electrolux appliances with a depth of 52 to 67 cm; check the model numbers and manuals as well.
Consider this : if you can’t install a stack or only have space for one appliance.
Bear in mind : washing and drying share the same machine, and drying capacity may be lower. For model F952SR50WRS, LG France gives a washing capacity of 9 kg and a drying capacity of 5 kg.
| What matters | What to check before buying | Who this affects |
|---|---|---|
| Compatibility and stability | Model numbers approved for the kit and weight limits given in the manuals. | If I want to keep two separate appliances, I check that the kit accepts their exact model numbers and that the installation will stand on a stable floor. Around 33 % of consumers prioritise compatibility and stability. |
| Space and access | Total height, door openings and clearances specified in the manuals. | In a low-ceilinged or narrow room, I check that I’ll be able to open the doors and reach the controls. Around 27 % of consumers prioritise space and access. |
| How much laundry you need to dry | Washing and drying capacities, listed separately in kg. | If I want to dry my load after washing it, I compare the drying capacity with the amount of laundry I usually wash. Around 20 % of consumers put drying capacity first. |
| Maintenance and everyday use | Access to filters, energy consumption figures measured on the same basis and the warranty available from the seller. | If maintenance and everyday use matter as much as installation, I check that the filters will be accessible and compare the energy consumption information. Around 20 % of consumers prioritise these factors. |
Manufacturers list compatibility that varies depending on the model numbers of their kits and appliances. Width or depth alone isn’t enough to confirm that a pair can be stacked.
Note down the full model numbers of your washing machine and tumble dryer, then check that they are listed as compatible by the kit manufacturer. Also check the load limits and fixing instructions in the manuals.
A stack takes up less floor space, but it adds height and can make doors, controls and maintenance points harder to reach.
Measure the total height with the kit in place, check that doors can open and compare the space with the clearances specified in the manuals.
For the LG F952SR50WRS washer-dryer, LG France gives a washing capacity of 9 kg and a drying capacity of 5 kg. This means a 9 kg wash load can’t be dried all at once.
Choose based on how much laundry you want to dry in one go, not just on washing capacity.
Kits and appliances with some compatibility information published for specific model numbers.
Kits with a shelf, designed for certain pairs of front-loading Electrolux appliances.
Kits whose compatibility can be checked using the appliances’ E-Nr. model numbers.
Washer-dryers to consider when only one appliance can be installed.
Stacking kits designed for specific ranges of washing machines and tumble dryers.
This selection includes stacking solutions and washer-dryers. If you’re planning a stack, always check that the kit or stand is compatible with the model numbers of both appliances and their manuals.
Image unavailable
Worth considering if you want to put a tumble dryer above a washing machine and have a pull-out shelf.
The product name specifies a pull-out shelf and a strap; check compatibility with the exact model numbers of your appliances and follow the instructions in their manuals.
Image unavailable
Worth a look if you’re after a washing machine stand with a base described as stackable.
Check that it’s compatible with the tumble dryer and appliances in question before stacking anything.
Image unavailable
Worth considering if you want one appliance for washing and drying instead of a stack.
The product name gives a washing capacity of 11 kg. Check the drying capacity listed for this model before planning your loads.
Image unavailable
Worth considering if you want to combine washing and drying in a single appliance.
The name gives a washing capacity of 10 kg and a drying capacity of 6 kg, so a full washing load can’t be dried all at once.
Image unavailable
Worth considering if you’re looking for an integrated appliance that combines washing and drying.
The product name gives a capacity of 9 kg and a spin speed of 1 400 rpm. Check the drying capacity and dimensions for your setup before choosing.
No. That description alone doesn’t confirm that your pair is compatible. Check the model numbers of both appliances against those approved by the kit manufacturer, and consult the manuals for load limits and fixing instructions. A depth range alone isn’t enough to confirm compatibility.
Que Choisir says that condenser tumble dryers, including heat pump models, can be installed without an external vent, unlike vented models. You should still follow the ventilation and clearance instructions in the manual for your chosen model.
Make sure you can easily reach the parts that need maintenance and follow your appliance’s manual. For tumble dryers covered by its instructions, LG recommends removing fluff from the filters and putting them back in place correctly before use.
No. Check the proposed location against the electrical regulations that apply to the room’s layout. Promotelec explains that the protection zones around a bath or shower affect where electrical appliances can be installed. Have the exact location and relevant requirements checked before installation.
No. For a purchase in France by a private individual from a professional seller, the French Ministry of the Economy explains that the statutory warranty of conformity is compulsory and separate from any commercial warranty. Check separately what any installation service includes.