Households switching to induction
You are replacing a gas, electric or ceramic hob and need to check your saucepans, frying pans and electrical installation before choosing induction.
Which households is it for?
Households cooking several dishes at once
You need three to five genuinely usable zones, large diameters or an adjustable zone for a plancha or large stockpot; the number of burners alone is not enough.
Projects constrained by existing fittings
You need to work around incompatible cookware, a gas supply, a freestanding cooker or an existing worktop cut-out.
Choosing criteria
Start with your cookware and existing installation, then check the space available and how you cook day to day.
| Priority | What to check | Your needs |
|---|---|---|
| Cookware compatibility | Test whether a magnet sticks to the base of your saucepans and frying pans. For induction, Electrolux specifies a ferromagnetic base that is as flat and thick as possible. | I want to keep my current cookware. If several items are non-magnetic, a ceramic or combination hob could save you from replacing everything. |
| Installation and fitting | Compare the cut-out, ventilation, total power, voltage and connection instructions for the exact reference. Promotelec states that a dedicated 32 A circuit is intended for an electric hob or cooker in installations covered by NF C 15-100. | My kitchen needs to accommodate the appliance without unnecessarily altering the worktop or circuit. Have the connection checked by a qualified professional whenever the project requires it. |
| Cooking zones | Match the number and dimensions of the zones, along with any Bridge or FlexiBridge functions, to your cookware. A combined zone can be useful for a plancha or large dish, depending on the model. | I want to prepare several dishes without running out of room for a large frying pan, casserole or plancha. |
| Energy and usage | Check the energy sources available, the ventilation requirements for gas and any work needed. ENGIE points out that the actual cost also depends on household tariffs and cooking habits. | I am looking for a solution that suits my installation and how I use it, rather than an identical promise of savings for every household. |
Mistakes to avoid before buying
-
Ordering an induction hob without checking your cookware bases
An induction hob will not heat a pan whose base is not ferromagnetic. Your cookware compatibility can therefore affect the whole project.
Test the cookware you actually use with a magnet, then make a list of the items that need replacing before comparing models.
Replacing incompatible saucepans and frying pans can add to the overall project cost.
-
Relying on the “60 cm” label alone
Two hobs with the same apparent width may require different cut-outs, under-worktop depth or connection power. For example, the Electrolux DAI6301C specifies a 560 × 490 mm cut-out and a total power of 6,000 W.
Compare the installation diagram for the exact model with the available cut-out, ventilation space and connection before removing the old hob.
An incorrect cut-out or insufficient clearance may require alterations to the worktop or installation.
-
Choosing a large hob or cooker without measuring the available space
A 90 cm hob and a freestanding cooker have different requirements from a 60 cm hob. The Beko FBE68314MXC is listed by the manufacturer as measuring 60 × 60 × 85 cm.
Measure the available width, depth, height and clearances specified in the manual. For a freestanding installation, also check the delivery route and the position of the electrical or gas connections.
An appliance that is too large may require modifications to the furniture.
-
Assuming induction is always cheaper to run than gas
Efficiency is only one factor to compare: household energy tariffs, cooking habits and any work required also affect the actual cost. A gas or combination solution also involves installation and ventilation requirements.
Compare how you cook, the energy sources available and the work needed before choosing based solely on efficiency.
Brand guide for this project
Electrolux
French range of built-in induction hobs from 60 to 90 cm, with Bridge or FlexiBridge zones depending on the reference, as well as induction-gas combination hobs.
- Manufacturer product sheets provide details including power, voltage, cut-out dimensions, number of zones and adjustable functions for each model.
- The specifications of one reference, such as the DAI6301C or EIV95550, do not apply to the entire range: check the product sheet for your chosen model.
Bosch
Range of built-in induction and ceramic hobs, including 60 cm configurations and combined zones on selected models.
- Some references offer Combi Zone or FlexInduction for joining cooking zones together.
- Bosch recommends professional installation for its induction hobs; dimensions, power and functions must be compared reference by reference.
Beko
An option to consider when replacing a freestanding cooker with an integrated hob, rather than simply replacing a built-in hob.
- The Beko FBE68314MXC product sheet states a size of 60 × 60 × 85 cm and a 72 L oven, which is useful when assessing the space required for a complete replacement.
- These dimensions and this capacity apply to this specific model and do not describe all Beko cookers.
Joybuy options
Joybuy options for fitting out a built-in kitchen with an induction or ceramic hob, depending on your cookware compatibility and the dimensions available.
Image unavailable
Hisense HI6432BSCWF Hi6, 60 cm induction
For a built-in kitchen where several dishes and a large frying pan or plancha are planned.
Four induction zones with a Bridge zone; stated cut-out of 56–56.2 × 49 cm and stated power of 7.36 kW. Use cookware with a ferromagnetic base and have the connection and ventilation checked.
Image unavailable
HK654850XB Series 3000, 60 cm ceramic hob
A built-in option if you want to continue using non-magnetic cookware.
Four zones, including one expandable zone stated as reaching up to 17 × 26.5 cm. Check the 56 × 49 cm cut-out, fitting height and 220–240 V / 400 V 2N connection.
Image unavailable
TOPWISH, 4-zone built-in induction 60 cm
For four everyday cooking tasks in parallel within a known built-in recess.
Four zones, including two 180 mm zones, with a stated cut-out of 56.5 × 49.5 cm and 220–240 V power supply. No Bridge or flexible zone is specified; the cable is supplied without a plug.
Image unavailable
AEG IKS64453IB, 60 cm induction with Bridge
Worth considering if you use a plancha or large cookware on a four-zone built-in hob.
FlexiBridge function and 7.4 kW power are stated. The published dimensions appear inconsistent with the stated width: check the technical specifications, cut-out diagram, ventilation and connection.
Image unavailable
TOPWISH, 4-zone ceramic hob 60 cm
An alternative for keeping cookware made from different materials in a built-in kitchen.
Two dual-circuit zones and a stated cut-out of 56 × 49 cm. Total power is listed as both 6,600 W and 6,000 W: confirm the technical specifications and required connection.
Frequently asked questions
How can I check whether my saucepans work with an induction hob?
Test whether a magnet sticks to the base of the pan. Electrolux also recommends a base that is as flat and thick as possible; check for the induction symbol or the cookware manufacturer's instructions too.
Can I replace an existing hob with an induction model myself?
Do not assume that the connection is interchangeable. Bosch recommends professional installation; Promotelec states that a dedicated 32 A circuit is intended for an electric hob or cooker in new or fully renovated installations covered by NF C 15-100. In an existing kitchen, have the circuit, protection and connection checked by a qualified professional.
Will a 56 × 49 cm worktop cut-out fit all 60 cm hobs?
No. This cut-out corresponds, for example, to the Electrolux DAI6301C, whose built-in dimensions are 48 × 560 × 490 mm, but each reference may have its own requirements. Compare the installation diagram for your chosen model with the existing cut-out before buying and before making any changes to the worktop.
Does an induction-gas combination hob mean I do not need to check the gas installation?
No. A combination hob includes an induction zone and gas burners, but the gas section remains subject to the relevant installation and ventilation requirements. It is best suited to those with a practical reason to keep gas or with cookware that is not compatible with induction.
What protection is available after buying a new hob in France?
According to the French Ministry of the Economy, the statutory guarantee of conformity can be claimed from the professional seller for two years for new goods. Any commercial warranty is separate and does not replace this right; keep your invoice, order confirmation, product sheet and installation document.