For drying laundry indoors, first compare the spin efficiency class, noise during spinning, energy and water consumption, and the duration of the Eco 40-60 programme. A front-loading washing machine is suitable when a choice of capacities matters, while a top-loading model is preferable when access and width are key considerations. A washer-dryer or separate tumble dryer is mainly suited to different space and installation requirements.
The spin efficiency class, noise during spinning and the consumption figures for the Eco 40-60 programme are useful points of reference. ADEME recommends choosing a spin class A when laundry needs to dry quickly indoors.
A washer-dryer can free up space, but its drying capacity is lower than its washing capacity. Before choosing a combined appliance, also check the duration and consumption of the complete cycle.
Compare the stated noise level during spinning and, where possible, independent tests covering noise, spin performance and ease of use for the exact model.
To compare appliances on a consistent basis, look at the energy label figures for the Eco 40-60 programme, then check that they match your laundry habits.
| Priority | What to check | Your needs |
|---|---|---|
| Spin performance | Compare spin efficiency classes A to G on the label. Where available, also check the spin results from an independent test of the exact model. | I want to remove more water from my laundry so it dries faster on an indoor airer. |
| Noise during spinning | Check the decibel rating and noise class A to D stated for spinning. An independent test can provide additional information about the model you choose. | The machine will be used in or near a living area, so noise during spinning genuinely matters. |
| Consumption and duration | Compare kWh per 100 cycles, litres per cycle and the duration of the Eco 40-60 programme. Then check the programmes you are most likely to use. | I want to keep water and electricity use under control without choosing a cycle that is too long for my household’s laundry routine. |
| Size and format | Measure the width, depth, door opening and access to the loading area. For a washer-dryer, compare the washing and drying capacities separately; for a vented tumble dryer, check whether an external opening or vent hose is possible. | The space available to me determines whether a front-loader, top-loader, combined appliance or two separate appliances is feasible. |
The maximum speed shown does not replace the regulated spin efficiency class or an independent measurement. Appliances with a similar spin speed can differ in rinsing, noise, duration and consumption.
Compare the spin class, stated noise level and independent tests covering the exact model, where available.
Drying capacity is lower than washing capacity, so a full washed load cannot necessarily go straight into a drying cycle.
Check the permitted kilogrammes for each mode and adjust the load to the drying capacity if you want to run a continuous cycle.
You may need to remove some of the laundry before drying, making your laundry routine take longer to organise.
Energy label data relates to the Eco 40-60 programme and its regulated conditions. Another everyday cycle may have a different duration and consumption.
Use the label to compare models with one another, then check the stated duration of the programmes you will need.
A heat-pump tumble dryer uses less electricity than a conventional or vented model, while conventional models may dry clothes faster. A vented appliance requires an external opening or vent hose.
If you have the space, compare this option with a washer-dryer, taking capacity, drying time, installation and consumption into account.
This option requires space for a second appliance, as well as routine tumble-dryer maintenance.
These Joybuy options include front-loading washing machines, a top-loading washing machine and a washer-dryer for households that mainly dry their laundry indoors.
Image unavailable
A shallow front-loading washing machine for everyday laundry in a home where space is at a premium.
8 kg capacity, spin class B, 72 dB spin noise and noise class A. The Eco 40-60 programme is stated at 33 kWh/100 cycles, 38 L/cycle and 3 h 38.
Allow enough clearance to open the door; spin class B should be compared with class A if fast indoor drying is a priority.
Image unavailable
This front-loading format suits households with large loads to wash before drying on an airer.
10 kg capacity, spin class B, stated noise level of 68 dB(A) with noise class A, 41 kWh/100 cycles and 48 L/cycle. The Eco 40-60 programme lasts 3 h 58; the stated dimensions are 595 × 850 × 611 mm.
Check that this duration and size suit your routine, as well as the independent spin and noise results available.
Image unavailable
A standard-capacity front-loading option for comparing spin performance, noise and reference programme duration.
Spin class B, noise class A at 72 dB, 40 kWh/100 cycles and 44 L/cycle. The Eco programme is stated at 175 minutes; the stated depth is 59 cm.
Check that 7 kg meets your household’s usual laundry volume and allow enough space in front of the door.
Image unavailable
A washer-dryer designed for small homes that cannot accommodate two appliances.
The stated capacity is 10 kg for washing and 6 kg for drying, with 27 programmes, app control, automatic dosing and a LintClear system.
Do not assume that a full washing load can be dried continuously: check the model’s label and manual for the wash-dry cycle, noise, duration and consumption.
Image unavailable
A top-loading washing machine for narrow spaces or when loading without bending down is important.
7 kg capacity, stated width of 405 mm, spin class B, 40 kWh/100 cycles and 42 L/cycle. The Eco 40-60 programme lasts 3 h 28; the stated spin noise is 77 dB(A), with noise class C.
This noise level deserves particular attention if the machine is installed near a living area.
First compare the spin efficiency class from A to G, then check the spin results from independent tests where available. ADEME recommends choosing class A when laundry needs to dry quickly indoors; the maximum rpm alone is not enough to assess performance.
Yes, when they relate to the Eco 40-60 programme: the label shows the energy class, energy used per 100 cycles, water used per cycle, duration and noise, among other details. Compare appliances on this same basis, without assuming that it alone reflects every washing, rinsing or spinning result.
It is suitable when there is not enough space for two appliances and each load can be limited to the stated drying capacity, which is lower than the washing capacity. It lets you run the stages consecutively, but drying is generally longer, so compare the consumption of the complete cycle.
A vented tumble dryer requires an opening to the outside or access to a ventilation hose, according to the UFC-Que Choisir guide. Condenser appliances, including heat-pump models, do not need this external connection; however, check the installation requirements in the manual for the exact model.
Since April 2025, new washing machines must display a durability index, according to ADEME. Use this benchmark alongside information about access to spare parts and documentation when comparing models.