To add or replace a dishwasher in an IKEA METOD kitchen, start by choosing a fully integrated model whose niche dimensions, door front and plinth meet the limits set out in the installation instructions. IKEA models designed for METOD use their own fixing system. A model from another brand may also be suitable if its door system and dimensions work with your installation, but don’t assume that any fitting kit is universal. Once you’ve confirmed it will fit, compare capacity, noise levels, energy and water use, and repairability to find the right option for your needs.
Your METOD door front, plinth and worktop are already in place. Your priority is to check that the new door opens without requiring any visible alterations, and that the existing door front can be fitted according to the instructions for your chosen model.
Pay particular attention to the door’s opening clearance. Bosch describes its VarioHinge sliding-door system as particularly suitable for plinths under 90 mm high. You’ll still need to check your kitchen measurements and the limits for the exact model.
Once you’ve confirmed that installation is possible, compare compatible models by capacity, noise level and the energy and water use shown on the label. ADEME lists these as factors to consider when choosing a dishwasher; you should also check the repairability index for the model sold in France.
Consider this if: you want to use the fixing system supplied with an IKEA dishwasher and choose a door front to suit your METOD configuration, as recommended by IKEA France.
Bear in mind: you’ll still need to measure the niche and check the instructions. Depending on the model, the door front, plinth, handle and worktop may need to be purchased separately.
Consider this if: you’re looking at a fully integrated third-party model whose door-front fixing system is compatible with this IKEA sliding kit.
Limitation: IKEA France says BEHJÄLPLIG cannot be used with Bosch, Brandt, Beko, Candy and Miele appliances, among others. Check that the fixing system is suitable for the brand and model you choose.
Consider this if: there’s a risk that the door front will catch on a low plinth. Bosch describes VarioHinge as particularly suitable for plinths under 90 mm high.
Limitation: check that the exact model has a sliding door, then make sure it’s compatible with your door-front dimensions and weight, as well as the clearances specified in its instructions.
| Criterion | What to check | Relevant to which consumers? |
|---|---|---|
| Opening and door front | Measure the niche and plinth, then check the door-front dimensions and weight, as well as the door’s travel, against the instructions for the exact model. | If my existing door front might catch on the plinth, I want to resolve that before choosing wash functions; around 36% of consumers put this mechanical compatibility first. |
| Installation | Identify the approved fixing system for the fully integrated appliance and follow its installation instructions, including those for protection beneath the worktop. | If I’m replacing my appliance without adding lots of extra adjustments, I want to know exactly how to fit the door front; straightforward installation comes first for around 29% of consumers. |
| Everyday use | Among models that will fit, compare capacity, noise level, basket layout and drying performance. | If the dishwasher runs often in my kitchen, I want to be able to fit my dishes in and keep noise to a minimum; around 21% of consumers prioritise everyday use. |
| Energy and water use, and repairability | For compatible models, compare kWh per 100 cycles, litres per cycle and the repairability index shown. | If I’m choosing between several appliances that can be installed, I look at water and energy use, as well as whether the appliance can be repaired; this is the main priority for around 14% of consumers. |
This measurement doesn’t tell you whether the door front will open without catching on the plinth. Bosch offers fixed-door and sliding-door systems, among other options, for this reason.
Measure the niche, plinth and door front, then compare them with the installation diagram for the exact model.
You may need to adapt the plinth or door front if there isn’t enough clearance.
IKEA France says this kit is not suitable for Bosch, Brandt, Beko, Candy and Miele appliances, among others. A sliding mechanism doesn’t make all fixing systems interchangeable.
If you’re choosing a brand that’s excluded, check the appliance manufacturer’s recommended fixing system instead of planning to use this IKEA kit.
IKEA’s installation instructions call for a vapour barrier beneath the worktop when fitting its dishwashers, to protect the surface from water vapour.
Check which parts are supplied with your chosen model and fit the protection according to its instructions.
IKEA France offers dishwashers designed for METOD kitchens and says its appliances use their own door-front fixing system, without the BEHJÄLPLIG kit.
Models featuring the VarioHinge sliding-door system may be an option for kitchens with low plinths. Bosch describes it as particularly suitable for plinths under 90 mm high.
Some fully integrated Siemens models feature varioHinge, including the SN95EX22CE listed by Siemens Électroménager France.
No. To fit a door front in this configuration, the appliance must be fully integrated, and its dimensions and fixing system must suit the niche, door front and plinth. IKEA France provides the BEHJÄLPLIG kit for some third-party appliances, but says it cannot be used with Bosch, Brandt, Beko, Candy and Miele appliances, among others.
A sliding door is worth considering if the door front might catch on a low plinth. Bosch describes VarioHinge as particularly suitable for plinths of 9 cm or less. Then check the door-front limits and clearances in the instructions for the exact model.
IKEA France says it doesn’t offer a kit to install a semi-integrated dishwasher with an external control panel in this configuration. If you want a door front that covers the whole appliance, look for a fully integrated model and check its fixing system.
Compare capacity and noise levels for your needs, then check the consumption figures for each model. ADEME explains that the energy label shows electricity use in kWh per 100 cycles and water use in litres per cycle, among other details. Also check the repairability index shown for the dishwasher you choose.