First, choose the installation type your kitchen allows. An integrated model must fit the niche, door panel and door system provided for, while a freestanding model suits a layout without a dedicated cabinet door panel. If you need a 45 cm-wide appliance, check that its capacity suits the amount of washing up you generate. Then compare noise levels and Eco programme figures between appliances with similar capacities.
If a niche and cabinet door panel are already planned, check that the door is compatible and confirm the installation dimensions before choosing programmes. Bosch recommends measuring the niche and checking the diagram for the model in question.
A 45 cm format is worth considering if a wider appliance won’t fit in the available space. However, UFC-Que Choisir notes that stated capacities generally vary by width, so check that the capacity suits your household’s washing up.
If the dishwasher will be running while people are using the living space, its stated noise level becomes an important factor. ADEME and UFC-Que Choisir recommend considering it alongside the other model specifications, without overlooking capacity or installation requirements.
Decide on the installation type before comparing energy labels. A 45 cm width may suit a space-constrained kitchen, whether you choose a freestanding or integrated appliance.
Consider this if: there’s no cabinet door panel planned, or you’d prefer an appliance with its own finished exterior.
Bear in mind: the appliance’s front will remain visible. If you plan to install it under a worktop, check whether the top can be removed for the model you’ve chosen.
Consider this if: your kitchen has a niche and, for an integrated model, a compatible cabinet door panel.
Bear in mind: installation also depends on the door system and connections. Instructions for one model won’t necessarily apply to another.
| Criteria | What to check | Who is it for? |
|---|---|---|
| Installation and connections | Compare your niche measurements with the model diagram, then check the planned door panel, door and connections. | If my fitted kitchen has already been designed, I need to be able to install the appliance without discovering that its door or connections aren’t compatible. Around 31% of consumers rank this compatibility as their top priority. |
| Width and capacity | Compare the available width, particularly for 45 and 60 cm formats, with the stated capacity in place settings. | In a small kitchen, I want an appliance that fits the space and can still handle my usual washing up. Around 25% of consumers would prioritise this balance between dimensions and capacity. |
| Noise | Check the noise emissions in dB and the noise class on the label, and consider when the dishwasher will be running. | With an open-plan kitchen, I want to know whether the dishwasher can run while people are using the room. Around 19% of consumers put low noise first. |
| Consumption and drying | For appliances with similar capacities, compare kWh per 100 Eco cycles, litres per Eco cycle and Eco programme duration. Check the model’s drying performance separately. | If I run cycles often, I want to compare the water, energy and time needed without losing sight of the drying results I’m looking for. Around 25% of consumers prioritise this combination of criteria. |
According to ADEME and the European Commission, the label shows information including energy use in kWh per 100 cycles, water use in litres per cycle, Eco programme duration, capacity and noise. These figures don’t tell you everything about every programme. To compare two appliances, make sure their capacities are similar and use a consistent basis for comparison. For common formats, UFC-Que Choisir gives a capacity of 9 to 10 place settings for 45 cm models, compared with 12 to 17 for 60 cm models. Always check the capacity of the specific model.
A stated width of 60 cm doesn’t confirm that the niche height is suitable or that the door panel and hinges are compatible. Bosch highlights the importance of measurements and the door system for its built-in appliances.
Before buying, compare your kitchen measurements with the installation diagram for the exact model. Remember to check the door opening and connections, too.
You may also need extra work to fit a door panel or adapt the cabinetry.
The water and energy figures on the label refer to the Eco programme. A figure on its own won’t tell you whether the appliance’s capacity is right for the amount of washing up your household generates.
Compare capacity, kWh per 100 cycles, litres per cycle and Eco programme duration across similar models, using the information described by ADEME and the European Commission.
If the dishwasher is running while people are in the living room, its noise level matters more when choosing a model. UFC-Que Choisir specifically highlights noise as a consideration for open-plan kitchens.
Check the stated noise level and noise class on the label, then consider them alongside the times you’re likely to use the appliance.
A useful source of guidance if your project includes a niche and a cabinet door panel.
Worth checking model by model for a 60 cm fully integrated kitchen.
A brand to look at if your project requires a 45 cm fully integrated model.
Explore the range if you’re deciding between freestanding, built-in with a visible control panel and fully integrated.
These models offer the chance to consider a freestanding appliance and several 60 cm integrated appliances for a kitchen project. Before deciding whether one suits your space and needs, check the manual and energy label for the specific model.
Image unavailable
Worth considering if your kitchen doesn’t have a cabinet door panel planned for the dishwasher. The title lists a width of 60 cm, 14 place settings, a C energy rating and 41 dB. Check the manual for installation requirements, particularly if you want to fit it under a worktop. For a comparison of everyday running costs, check the Eco label figures, too.
Image unavailable
Consider this for a kitchen designed for a fully integrated appliance. The title lists a width of 60 cm, 14 place settings and a C energy rating. However, the dimensions given for this model need to be clarified in the manual before you confirm that the niche and door panel will fit. Check the Eco label figures as well when comparing energy use.
Image unavailable
Worth considering for an integrated kitchen project requiring the stated capacity of 13 place settings. The title lists a 60 cm format and a B energy rating. Check the manual for details of the niche, door panel and door. If noise matters to you, compare figures for the same programme, as a figure for Extra Silence mode may not match the one on the energy label.
Image unavailable
Consider this if your kitchen is designed for a 60 cm built-in model and 13 place settings suit your needs. The title lists a C energy rating. This model is described as having a sliding door, so check the fitting method, niche dimensions and door panel against the manual before buying. Then consult the label to compare Eco consumption figures.
Image unavailable
Worth considering for a fitted kitchen where a 60 cm integrated model with 14 place settings suits your plans. The title lists an E energy rating and a white finish. Check the niche diagram, door panel and connections for this model. To compare its energy use or drying performance with other models, refer to its label and manual.
Measure the width, height and depth of the niche, then compare them with the range allowed in the model’s installation diagram. Also check the door panel, hinge, door opening and planned connections. Instructions for one appliance, such as a Bosch model, don’t confirm that another model will fit.
First compare appliances with similar capacities, then look at the energy rating, kWh per 100 cycles, litres per cycle, Eco programme duration and noise together. According to the European Commission, these label figures refer to the Eco programme. They don’t automatically describe other programmes or the drying results you’re looking for.
Check the documentation for your chosen model. It should confirm whether the top can be removed and give the dimensions for this installation. Even under a worktop, a freestanding model doesn’t become an integrated appliance with a cabinet door panel.
No. The French Ministry of the Economy states that the statutory guarantee of conformity is compulsory for new, used and refurbished goods sold by a business to a private individual. A commercial warranty is separate: check its terms and don’t confuse it with your statutory rights if an appliance doesn’t conform to its description.