Who is this guide for?

Anyone keeping their fitted kitchen

Compare the dimensions of the space and plinth, the door panel available and the connections against the instructions for the model you’re considering. A stated width of 45 cm or 60 cm alone isn’t enough to confirm that it will fit.

Anyone looking for a seamless finish

You’d prefer to conceal the appliance behind a door panel that matches your units. Miele says the relevant built-in or integrated appliances require a door panel, which isn’t supplied; check what your chosen model needs.

Anyone with a narrow space

The space available will guide your choice before capacity comes into it. To give you a point of comparison for technical dimensions, Siemens lists the 45 cm SR65EX09ME as 448 mm wide, compared with 598 mm for the 60 cm Bosch SME25AX07F, according to Bosch.

What should you check before choosing?

When choosing an integrated dishwasher, check that it will fit in your units before comparing capacity and performance indicators. The type of integration then determines which parts of the appliance will remain visible.

Fully integrated

Choose this if:  you want to conceal the door and controls behind a panel that matches your units.

Keep in mind:  you’ll need a door panel that’s compatible with the model’s fixing and door-opening system. Miele says a panel isn’t supplied with the relevant appliances.

Semi-integrated

Choose this if:  a visible control panel suits your kitchen; Electrolux describes its EEG68600IX as a semi-integrated model.

Keep in mind:  the control panel interrupts the seamless finish. If you’re considering a raised installation, check that it’s permitted: Electrolux says the EEG68600IX can’t be installed this way.

What to considerWhat to checkWho this matters to
Space and installation Measure the usable width, height and depth; check the plinth and door-panel fixing against the installation instructions. If I’m keeping my units, I want to be sure the door will open and the appliance can be connected up. Around 36% of consumers put installation compatibility first.
Width and capacity Compare the exact dimensions of 45 cm and 60 cm models, then check their place settings and basket layout. When space is limited, I need to choose a suitable width without losing sight of the dishes I need to wash each day. Width and capacity come first for around 29% of consumers.
Door panel and controls Decide whether you’re happy for the control panel to remain visible, and confirm that the planned door panel will fit the model. To match the door to my units, I prioritise the look of the finish while accepting the fitting requirements. This is the main consideration for around 21% of consumers.
Performance indicators Once you’ve found compatible models, compare energy use per 100 Eco cycles, water use per Eco cycle and noise levels on the energy label. Once I know installation is possible, I want to compare appliances by their energy use and noise levels. Around 14% of consumers put these performance indicators first.

Mistakes to avoid before ordering

  • Relying on the “45 cm” or “60 cm” label alone

    This stated width doesn’t tell you the appliance’s height or depth, or whether there are any restrictions on opening the door.

    Compare the technical dimensions and installation instructions with your measured space, remembering to allow for the plinth and fitting gaps.

    If these details don’t match, you may need to modify the units or choose a different appliance.

  • Assuming the door panel is supplied or can be reused

    Miele says the relevant built-in or integrated appliances need a door panel, which isn’t supplied. An existing panel must also be compatible with the new model’s fixing system.

    Check its dimensions, weight and drill holes against the instructions, asking your kitchen fitter for advice if needed.

    Depending on your kitchen, you may need a suitable door panel, a fitting accessory or joinery work.

  • Assuming the Eco figure applies to every programme

    The energy figures shown on the energy label relate to the Eco programme; they don’t automatically represent the other programmes.

    Compare compatible models on the same basis, then check their product information to find the programmes that suit you.

  • Booking installation before planning any extra work

    Electrolux’s installation service doesn’t include joinery, plumbing or electrical work carried out by other tradespeople.

    Before booking, confirm which connections are already in place and what work is planned with your chosen installer.

    Depending on the condition of your kitchen, you may need to arrange work separately from the appliance installation.

Brands to consider for a fitted kitchen

Bosch

The range includes 60 cm fully integrated dishwashers to consider based on your unit dimensions and door clearance.

  • Bosch lists dimensions of 815 × 598 × 550 mm for the SME25AX07F and names its hinge system VarioHinge.
  • These specifications apply to this model: check its instructions against your space, plinth and door panel.

Electrolux

The EEG68600IX is an example of a 60 cm semi-integrated dishwasher with a visible control panel.

  • Its product information helps you identify the integration type and width to check against your kitchen plans.
  • Electrolux says the EEG68600IX can’t be installed at height; this restriction applies to this model.

Siemens

The range includes 45 cm fully integrated models, among other options, for narrower spaces.

  • Siemens lists dimensions of 815 × 448 × 550 mm for the SR65EX09ME.
  • These measurements don’t replace the need to check your space, door panel and the instructions for your chosen model.

Miele

The fully integrated range lets you choose a door panel that matches your kitchen units.

  • Miele says a separately selected door panel is required for the relevant built-in or integrated appliances.
  • Check the dimensions and fixing method for the panel you’re considering.

Joybuy products

Related products coming soon.

Frequently asked questions

What’s the difference between a fully integrated and a semi-integrated dishwasher?

A fully integrated dishwasher is concealed behind a door panel that matches your units, while a semi-integrated model has a visible control panel. Miele says the relevant built-in or integrated appliances need a door panel, which isn’t supplied. In either case, check that the fixing method is suitable for your chosen model.

Does a small kitchen mean I need a 45 cm model?

No: your measured space and the capacity you need should guide your choice. Siemens lists dimensions of 815 × 448 × 550 mm for its 45 cm SR65EX09ME, compared with 815 × 598 × 550 mm for the 60 cm Bosch SME25AX07F, according to Bosch. Remember to check the fitting gaps and door clearance too.

Which connections should I check before delivery?

Check the water supply, waste outlet and electrical connection, following the instructions for your model. Bosch requires installation in line with its fitting instructions; if extra work is needed, confirm separately who will carry it out.

How do I compare the energy use of two compatible models?

Compare their energy labels on the same basis. The European Commission lists energy use per 100 Eco cycles, water use per cycle and noise emissions, among other information. These figures don’t guarantee the energy use of other programmes.