Start by choosing a format that fits the space you have actually measured and the connections already in place. A slim freestanding model is suitable when a compatible water inlet, waste outlet and power socket are available without modifying the kitchen. An integrated model requires a suitable housing unit and existing installation, while a countertop model may reduce the need for a fixed water inlet, depending on the model, but still requires a waste outlet and offers less capacity.
A slim freestanding dishwasher may be suitable if the actual dimensions, water inlet, waste outlet and compatible socket are already accessible near the intended location. Also check that opening the door will not obstruct movement around the kitchen.
If dishes build up every day but a 60 cm model will not fit in your kitchen, compare 45 cm appliances based on their stated capacity, basket layout, noise level and the consumption figures shown on the energy label.
A tank-equipped countertop model may be worth considering when the waste outlet, support stability and limited dish capacity suit the way you use it. However, you will still need to organise manual filling and draining on a daily basis.
Choose this if: a water inlet, waste outlet and power socket are already available, with enough depth for a floor-standing appliance and room to open the door.
Bear in mind: this format does not require a housing unit, but it is still fairly deep, and performance, noise and energy use vary by model.
Choose this if: a housing unit, compatible door panel and the required connections are already in place in the kitchen.
Bear in mind: you should not assume that adapting the unit, plumbing or electrics is permitted in a rented property.
Choose this if: you have a limited amount of washing-up and a worktop appliance is more realistic than a floor-standing model.
Bear in mind: a tank can eliminate the need for a fixed water inlet on some models, but draining, stability and manual filling still need to be managed.
| Priority | What to check | Your needs |
|---|---|---|
| Connections and renting | Check the water inlet, waste outlet and socket near the intended location. For a tank model, also check the route and positioning of the waste hose. Any modification to rented furniture or equipment requires particular care. | I want to install the appliance without carrying out work that is unsuitable for the property. Bosch documentation states that a standard dishwasher connects to the water supply, electricity and the designated waste outlets. |
| Overall size and capacity | Measure the height, width and depth, then allow for the door opening, skirting boards and access route. Compare the place-setting capacity with the amount of washing-up you actually produce. | I need to keep the kitchen easy to move around while avoiding multiple cycles because of limited capacity. A width of 45 cm can help in a compact kitchen, but it does not indicate the depth or capacity on its own. |
| Noise | Compare the noise level in dB and the noise class on the energy label of similar models. Consider how close the appliance will be to a bedroom or living area. | I would like to run a cycle without excessive disturbance in an open-plan kitchen. The ADEME explains that noise classes A and B are particularly quiet, and that a difference of 3 dB represents almost twice the noise. |
| Water and energy | Compare energy consumption in kWh per 100 cycles, water consumption in litres per cycle, the duration of the Eco programme and the capacity, using the same reference programme. | I want to relate the consumption figures to my actual usage pattern rather than choosing solely on the basis of an energy class. |
A slim appliance may still take up considerable depth, blocking a passage or preventing a unit door from opening. The Bosch SPS4EMI11E, for example, measures 845 × 450 × 600 mm according to Bosch Électroménager France.
Measure the space in all three dimensions, allow for the door clearance and check the delivery route before placing your order.
The tank may remove the need for a fixed water inlet on some appliances, but the hose drain, stability of the supporting surface and limited capacity remain practical considerations.
Decide where the waste water will go, how the hose will be secured and whether the daily volume of washing-up justifies manual filling.
Article 7 of the French law of 6 July 1989, published by Légifrance, states that a tenant must not alter rented premises or equipment without the landlord’s written permission. In particular, the landlord may require the property to be restored under the conditions set out in this legislation.
If installation requires drilling, or modifying the waste outlet, electrics or furniture, request written permission before carrying out any work and have the necessary intervention assessed.
The landlord may require the property to be restored if an unauthorised alteration has been made.
The energy label also provides information about water per cycle, the duration of the Eco cycle, capacity and noise. A good energy class alone does not address capacity, noise or installation requirements.
Compare all the fields on the label between appliances of the same format, then relate them to the number of occupants and how often you use the dishwasher.
In France, Bosch offers 45 cm freestanding and fully integrated dishwashers, providing useful benchmarks for comparing dimensions in a small kitchen.
Beko offers a French range of 45 cm integrated dishwashers for kitchens that can accommodate a slim appliance in an existing housing unit.
French manufacturer Daan Tech offers the Bob mini dishwasher, designed for very small spaces and situations without a fixed water inlet.
Miele offers 45 cm freestanding and integrated dishwashers, including models designed for compact kitchens.
These Joybuy options are countertop dishwashers for a small rented kitchen, where the available worktop space, water supply and waste outlet are suitable for the chosen model.
Image unavailable
For a small household without a nearby fixed water inlet, with drainage to a suitable container to be arranged.
Stated capacity of 4 place settings; stated dimensions of 45,8 × 42,8 × 42,5 cm; integrated 5 L tank and possible tap connection.
The noise level is not specified, and 4 place settings may mean more frequent cycles for several occupants.
Image unavailable
For a small household that already has an accessible water inlet and waste outlet near the appliance’s intended position.
Stated capacity of 6 place settings, 7 programmes, stated noise level of 47 dB, 6,5 L per cycle and 49 kWh/100 uses.
The overall dimensions are not specified: measure the supporting surface, access route and clearance required to open the door.
Image unavailable
For a small kitchen with limited space, when manual filling or a tap connection is suitable.
Stated dimensions of 420 × 435 × 435 mm; integrated 5 L tank; inlet and waste hoses included; stated energy class D.
The tap adapter is listed as not included. Also check the noise level, water consumption per cycle and that the waste hose can be secured safely.
Image unavailable
For one person or a couple with a small amount of washing-up who want to avoid a permanent connection to the water supply.
Stated capacity of 3 place settings; stated dimensions of 420 × 436 × 465 mm; manually refillable tank with the supplied jug.
Check the hose, drainage point and how it is secured. Noise, water consumption per cycle and energy use per 100 cycles are not specified.
Image unavailable
For a very small amount of washing-up in a kitchen where a temporary tap connection can be set up.
Stated capacity of 3 place settings; the description mentions a tap connection and drainage into a sink or bucket.
The dimensions, noise level and consumption figures are not specified. Secure the waste hose before use.
Buying a mobile appliance is not in itself an alteration, but do not assume that you are allowed to modify a unit, water inlet, waste outlet or electrical installation. Article 7 of the French law of 6 July 1989, published by Légifrance, requires tenants not to alter rented premises or equipment without the landlord’s written permission. Obtain this permission before making any necessary changes.
Check the water supply, electricity and designated waste outlets. Bosch Électroménager France specifies these requirements for installing its dishwashers. Also make sure that the location is stable, measured correctly and accessible without stretching or modifying the pipes. The exact requirements remain those set out in the model’s instructions and the property’s installation.
No, not entirely. For Bob, Daan Tech states that an integrated tank can remove the need for a fixed water inlet, but waste water still drains through a hose. Check the drainage point, the appliance’s stability and how the hose will be held in place.
Use the energy label to compare energy consumption in kWh per 100 cycles, water consumption in litres per cycle, the duration of the Eco programme, capacity, noise level in dB and noise class. The ADEME states that noise classes A and B are particularly quiet, and that a difference of 3 dB represents almost twice the noise.
Not automatically. A 45 cm integrated model is narrower than a standard model, but it depends on a housing unit and precise dimensions. The Bosch SPV4EMX17E, for example, measures 815 × 448 × 550 mm according to Bosch Électroménager France. Compare these measurements with the housing unit, available depth, door panel and connections before choosing.