Start by choosing the format that fits your available space: a freestanding model offers greater flexibility, an integrated model requires a compatible housing unit and door front, while a compact dishwasher is best suited to smaller loads and limited spaces. Then compare the Eco programme data on the energy label, and check that the capacity, noise level and interior layout match your actual routine.
A compact or 45 cm model can reduce the daily chore without taking up all your space. However, compare the capacity with the plates, pans and containers you use between cycles: a 6-place-setting model is aimed at smaller homes, while 9 place settings may suit a small family. Que Choisir also points out that an appliance may not be essential if washing and drying up after each meal takes less than 15 minutes.
Noise is worth comparing as a comfort factor, particularly when the kitchen shares space with the living room. ADEME states that a 3 dB difference corresponds to an almost doubling of noise, so check the dB level and noise class on the label, and consult tests of the exact model whenever available.
A freestanding model is easier to fit into a non-fitted kitchen, while an integrated model requires a compatible housing unit, door front and connections. Before choosing the visual finish, measure the space and check the installation requirements for your chosen model.
Start with the format and capacity, then compare the figures on the energy label and the features that affect everyday ease of use.
| Priority | What to check | Your needs |
|---|---|---|
| Capacity and format | Compare the number of place settings with the washing-up you actually produce. 45 cm models generally accommodate 9 to 10 place settings, while 60 cm models hold 12 to 17; a compact model may offer 6 place settings. | I want to avoid a machine that is too small and has to run too often, without installing one that is too large for my daily load. |
| Installation | Measure the available width, height and depth. For an integrated model, also check the housing unit, door front, hinges, water inlet and drainage. | My kitchen must accommodate the appliance without making guesswork alterations to the cabinet, worktop or connections. |
| Noise | Compare the dB levels and noise class on the labels of models in a similar format. Test results can provide additional insight beyond the declared noise level. | I want to run a cycle without disturbing conversations, relaxation or activities in an open-plan living space. |
| Water and energy | Read the energy class, kWh per 100 cycles, litres per cycle, Eco programme duration and capacity together. Always compare the same reference programme. | I want to understand the stated consumption figures rather than choosing based solely on the energy class letter. |
| Washing and loading | Examine the basket layout, cutlery drawer or basket and available programmes. Look for independent tests covering the washing, drying and noise performance of the exact model. | My pans, glasses and containers need to be easy to load, with results suited to the type of washing-up I produce. |
The A to G class does not replace the consumption, duration, capacity and noise figures. Two appliances in different formats will not necessarily suit the same use.
Compare the label figures for the exact model on the reference programme, after deciding on the necessary format and capacity.
An integrated model is designed to be installed inside a housing unit and behind a compatible door front; it cannot be installed like a freestanding appliance. Incompatible dimensions or a mismatched door can prevent proper installation.
Measure the housing unit before buying and check the technical dimensions, connections, type of door front and installation services included.
A capacity of 6 or 9 place settings saves space, but it may mean more cycles depending on your meals, pans and containers. A slim format is not automatically cheaper to run than a wider appliance.
Estimate one or two days’ worth of washing-up before choosing. If the machine is likely to run almost empty or too often, reconsider the capacity or whether you need an appliance at all.
Regular maintenance helps extend the appliance’s useful life. ADEME states that one in two breakdowns is linked to poor maintenance, while European rules cover the availability of certain spare parts.
Read the maintenance instructions, check access to filters and commonly replaced parts, then keep your receipt, exact model reference and warranty documents.
Bosch offers, among other options, 60 cm freestanding and fully integrated dishwashers on the French market. The French product pages for the SMS4EVW36F and SMV4EVX36F state an energy class of B, 9.0 l per Eco cycle and noise class B.
Beko features in recent French tests, notably with the BDFN15D431W, a 60 cm freestanding model with 14 place settings.
Miele offers 45 cm integrated models for compact kitchens, as well as XXL integrated and freestanding models on the French market.
In France, Whirlpool offers 45 cm and 60 cm integrated and freestanding dishwashers, with ranges such as MaxiSpace and PowerClean.
These Joybuy options include freestanding dishwashers, 60 cm integrated models and a compact countertop dishwasher, helping you match your kitchen and daily washing-up volume.
Image unavailable
For a substantial daily load in a kitchen that can accommodate a 60 cm freestanding appliance.
14 place settings, declared noise level of 41 dB, class C and dimensions of 600 × 590 × 850 mm. The top is stated to be removable for under-worktop installation at 82 cm, subject to conditions.
Check the available space, connections and the clearance needed in front of the door once the cycle has finished.
Image unavailable
Worth considering for regular loads in a kitchen that already has a compatible housing unit.
Fully integrated 60 cm model with 13 place settings, class B and a declared noise level of 44 dB(A). The Extra Silence programme is stated at 42 dBA.
A housing unit, compatible door front and suitable installation are essential; also check app compatibility for connected features.
Image unavailable
Suitable for a household that needs plenty of capacity in a kitchen designed for integrated installation.
14 place settings, class C, 10.5 l and 0.75 kWh declared per Eco cycle, with an Eco cycle lasting 240 minutes and a noise level of 44 dB.
Check the integrated installation dimensions, door front and connections before buying, as well as whether the Eco programme duration suits your routine.
Image unavailable
For a fitted kitchen handling daily loads and accommodating a fully integrated 60 cm appliance.
13 place settings, class C, declared noise level of 44 dB(A), a height-adjustable middle basket with three positions and a stated sliding door.
Check that the housing unit, door front and sliding-door system are fully compatible with your kitchen cabinet.
Image unavailable
A compact option for a small home and a limited volume of washing-up between washes.
Countertop format for 6 place settings, seven programmes, declared noise level of 47 dB, class D, 49 kWh per 100 uses and a stated 6.5 l per wash.
The capacity may require more frequent cycles when washing pans or numerous containers; the stated Eco cycle lasts 215 minutes.
Compare the energy class, kWh per 100 cycles, litres per cycle, Eco programme duration, capacity in place settings and noise emissions together with their class. These figures relate to the reference programme, often Eco, so compare models with a similar capacity and format.
Yes, if your washing-up volume and available space are limited. Models with 6 place settings are designed for smaller homes, while 45 cm models with 9 place settings may suit a small family; however, estimate how many cycles your daily washing-up would require.
In a shared living space, the appliance running can disrupt conversation, relaxation or evening activities. Compare the dB level and noise class on the label; according to ADEME, a 3 dB difference corresponds to an almost doubling of noise.
Allow for the connections and, depending on your installation, delivery, consumables such as detergent, salt and rinse aid, as well as maintenance. For an integrated model, also check the required door front and installation work.
The legal guarantee of conformity is compulsory in France for goods sold by a professional to a private individual, according to the Ministry of the Economy. It covers, among other things, a product that does not match its description and certain faults linked to installation carried out by the seller or inadequate assembly instructions; keep your sales documents.