Start by finding out whether a repair is possible: ADEME states that built-in ovens and hobs are among the appliances covered by the Repair Bonus in France, subject to the scheme’s conditions and the work being carried out by an approved repairer. If replacement is unavoidable, choose the solution that restores the missing function without unexpected kitchen alterations, after checking the housing, cut-out, electrical connection or gas installation.
If the oven or hob is still working, replace the faulty appliance first rather than the entire cooking area. Check whether it can be repaired, then confirm the dimensions and connection requirements of the appliance concerned.
For an integrated appliance, compare the housing or cut-out measurements, depth and ventilation clearances with the instructions for the model you have chosen before placing your order.
Switching to gas or induction depends on the existing installation. An induction hob requires an independent circuit and dedicated protection; a gas installation requires, among other things, safety, ventilation and connection checks.
The safest approach is to decide in this order: check whether a repair is feasible, confirm that the installation is compatible, then compare the features that are genuinely useful for your household’s meals.
| Priority | What to check | Your needs |
|---|---|---|
| Repair possible | Ask for a diagnosis and quote, and check the warranty. The French ministry responsible for ecology explains that the Repair Bonus is applied by an approved repairer; eligibility depends in particular on the appliance and the fault. | I want to get my usual meals back on track without replacing an appliance that could still be put back into service. |
| Built-in compatibility | Measure the height, width and depth of the housing for an oven. For a hob, compare the worktop cut-out, the specified dimensions and the clearances stated in the instructions. | My kitchen and units are staying in place: the appliance must fit without any unplanned alterations. |
| Available energy supply | For induction, Enedis states that an independent electrical circuit and dedicated protection are required. For gas, check the gas type, ventilation, tap and pipework with a suitably qualified professional. | I want to keep my current energy supply, or switch technology only if the installation can accommodate the new appliance. |
| Cooking capacity | Compare the oven’s usable capacity, the number of cooking zones, their layout and the cooking functions. Also choose a cleaning system suited to how often you use the appliance. | I need to be able to prepare several items at once without paying for features that will not be useful for my everyday meals. |
| Comparable information | For an oven, the European energy label provides details including capacity and consumption per cycle. For a hob, compare the energy supply, cooking zones, dimensions and model specifications instead. | I want to compare information that is appropriate to each type of appliance, without treating a hob like an oven. |
The advertised width is not enough: the built-in dimensions for an oven and the cut-out needed for a hob vary by model. Even a small discrepancy can prevent installation or reduce the required clearances.
Measure the existing opening, then compare every measurement with the installation instructions for the exact model, including depth and ventilation requirements.
An incompatibility could require alterations to the unit or worktop.
Enedis states that an induction hob requires an independent electrical circuit and dedicated protection. For gas, safety rules, ventilation, positioning and connection must be checked before choosing the appliance.
Ask a suitably qualified professional to confirm the requirements and compare them with the model’s instructions, rather than relying solely on the old appliance.
The installation may need adapting before the appliance can be fitted.
ADEME states that built-in ovens and hobs are among the appliances covered by the Repair Bonus. However, the possibility of repair depends on the fault and the repairer.
Ask an approved repairer for a diagnosis and quote, then compare the time needed to get the appliance working again with your everyday cooking needs.
The European Commission states that an energy label is mandatory for ovens, but not for hobs. A comparison based solely on an energy class therefore does not cover both categories in the same way.
For an oven, check the label and product information sheet. For a hob, focus on the available energy supply, cooking zones, dimensions and useful functions.
In France, Bosch offers built-in ovens, electric and induction hobs, and freestanding cookers, making it possible to compare several cooking formats.
Electrolux offers built-in ovens in a range of heights and capacities, which is useful when the kitchen housing determines which replacement model will fit.
Whirlpool offers gas, ceramic and induction hobs, built-in ovens and cookers for households comparing different energy sources or an all-in-one appliance.
These Joybuy options are intended to replace a built-in gas hob. Check the worktop cut-out and make sure the gas installation is compatible before ordering and fitting the appliance.
Image unavailable
Suitable for households replacing just a gas hob while still wanting to cook several items at once.
Four burners, including a rapid burner, specified cut-out of 55 × 47 cm, integrated ignition and automatic gas shut-off if the flame goes out. This model is configured for G20 natural gas; conversion to LPG must be carried out by a qualified professional. Also check the clearances, ventilation and connection.
Image unavailable
This hob could be the answer if you need to replace a separate cooking hob while keeping an oven that is still working.
Built-in format, four burners, electronic ignition and external dimensions of 59.5 × 51 cm. Compare the cut-out specified in the instructions with your worktop, and have the gas type, connection, ventilation and installation clearances confirmed before fitting.
No. ADEME recommends considering a repair where possible; built-in ovens and hobs are among the appliances covered by the Repair Bonus. Ask an approved repairer for a quote and check whether the fault is eligible before deciding to replace the appliance.
No. Enedis states that an induction hob requires an independent electrical circuit, a 30 mA type A residual-current device and a dedicated circuit breaker rated at no more than 32 A. Have the existing installation and the requirements in the instructions checked before buying or fitting the appliance.
Only if a suitable gas installation already exists or can be installed in accordance with the applicable rules. The French ministry responsible for ecology points out that gas appliances carry risks and must be installed in line with technical and safety requirements; check the ventilation, tap and pipework in particular.
Measure the internal height, width and depth of the housing, then compare them with the built-in dimensions in the product information and instructions for the specific model. Do not rely solely on a 60 cm front: the required dimensions vary between appliances.
No. The European Commission states that an energy label is mandatory for ovens, but not for hobs. For a hob, compare the available energy supply, number of cooking zones, dimensions and features suited to the way you cook.